Zaloguj się do B2B

Masz pytania? Zadzwoń – 502 229 001 |  Darmowa dostawa  już od 100 zł

NANOCOTE FORTE plus – Water-Based Stone Sealer, 1 L

98,00 złAdd to cart

Protect and strengthen natural stone with NANOCOTE FORTE plus: a water-based, breathable penetrating sealer that reduces water absorption and helps resist staining while preserving the surface’s natural appearance.

  • For marble, travertine, limestone and other absorbent mineral surfaces
  • Penetration up to 5 mm
  • Coverage: approximately 10–25 m² per 1 L bottle

Product details

Deep protection. Natural stone character.

NANOCOTE FORTE plus is a water-based penetrating sealer for protecting and strengthening absorbent mineral surfaces. Its silane-based formulation penetrates the substrate to create a hydrophobic barrier within the material, helping to reduce water absorption and the transport of dirt into the surface.

Designed for natural stone and other porous mineral materials, FORTE plus combines water repellency with a consolidating effect. It helps strengthen the treated substrate while maintaining its breathability and natural appearance, without adding gloss. The result is practical, long-lasting protection for both vertical and horizontal surfaces.

Why choose FORTE plus?

  • Water-repellent protection: helps prevent water from soaking into porous mineral surfaces and creates a water-beading effect.
  • Reduced staining and dirt penetration: limits the amount of water-borne soil entering the material, making surfaces easier to maintain.
  • Penetration up to 5 mm: protects within the substrate; actual penetration depends on the material and its absorbency.
  • Surface consolidation: helps strengthen the structure of the treated stone.
  • Breathable finish: preserves the material’s ability to release water vapour.
  • Natural appearance: designed to preserve the original look without adding a glossy finish.
  • Weathering resistance: helps reduce damage associated with water ingress, freezing and salt crystallisation.
  • Durable performance: the penetrating protection is resistant to abrasion, cleaning cycles, UV exposure and alkaline chemicals.
  • Water-based formula: straightforward application with a brush or manual pump sprayer; tools can be cleaned with water.

Suitable surfaces

For absorbent mineral substrates including marble, travertine, limestone, sandstone, granite, concrete, paving, brick, plaster and mineral façades. Suitable for horizontal and vertical applications. The substrate must be able to absorb the product; always test a small, inconspicuous area first to check absorption and the final appearance.

How to apply

  1. Prepare the surface. Ensure the substrate is clean and dry before treatment. Remove dirt and any residues that could prevent absorption.
  2. Apply evenly. Use a manual pump sprayer or brush to distribute the sealer uniformly over the surface. Apply one layer.
  3. Remove excess before it dries. Once the material stops absorbing the product, wipe away the surplus with a dry cloth or paper towel. Do not allow droplets or puddles to dry on the surface, as dried residues may be difficult to remove.
  4. Allow to dry. Protect the treated area from water and rain for 3–6 hours after application.

Technical information

Pack size 1 litre
Formula Water-based silane blend
Coverage Approximately 10–25 m² per litre, depending on substrate absorbency
Penetration Up to 5 mm, depending on the substrate
Application temperature +2°C to +30°C
Application methods Spraying, brushing or dipping
Number of coats One layer
Protection after application Keep away from water and rain for 3–6 hours
Tool cleaning Water
Storage Protect from freezing

Care and safety

Read the product label and all precautions before use. Keep out of reach of children. Do not swallow. Avoid contact with eyes and skin. Protect the container from freezing. Performance and coverage depend on the substrate, application and exposure conditions.

You may also like

ContactCart →